Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
NICKEL PALLADIUM GOLD |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
LM193 |
Pin Count |
8 |
Output Type |
CMOS, DTL, ECL, MOS, Open-Collector, TTL |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
1mA |
Output Current |
16mA |
Quiescent Current |
2.5mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106.02dB |
Average Bias Current-Max (IIB) |
0.4μA |
Supply Voltage Limit-Max |
36V |
Screening Level |
AEC-Q100 |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
5mV @ 30V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Current - Output (Typ) |
16mA @ 5V |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM193YDT Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, DTL, ECL, MOS, Open-Collector, TTL output is used here.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparator families.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.It's a typical General Purpose comparator.This is a 2 element comparator.The device is equipped with 8 pins.The recommended mounting type is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .The comparator is equipped with 8 pins.In order to find a solution that meets your specific needs, search LM193 for more pin-to-pin solutions.There is a quiescent current of 2.5mA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 1mA for normal use.5V power supplies are enough to run the device.You are allowed to input a maximum current of 250nA into the device.Based on the voltage formula, the voltage gain of the part is 106.02dB .
LM193YDT Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -55°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM193YDT Applications
There are a lot of STMicroelectronics LM193YDT linear comparators applications.
- General Purpose Low Voltage Applications
- Window Comparators
- Threshold Detectors
- Point of load regulators
- Pulse, Squarewave, and Time Delay Generators
- Self-diagnostics
- Automatic Test Equipment
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators
- RC Timers