LM201AVDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM201A |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Power Supplies | +-5/+-20V |
| Number of Channels | 1 |
| Operating Supply Current | 1.8mA |
| Nominal Supply Current | 1.8mA |
| Power Dissipation | 625mW |
| Output Current | 30mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 30nA |
| Voltage - Supply, Single/Dual (±) | ±5V~22V |
| Halogen Free | Halogen Free |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 104.08dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 700μV |
| Bias Current-Max (IIB) @25C | 0.075μA |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM201AVDR2G Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. A General Purpose-type buffer amplifier is shown here. Linear amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. There is an input offset voltage of 2mV for this buffer op amp. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~105°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 1.8mA, this op amp ic can operate. There should be no change in the voltage gain at 104.08dB. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 22V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.
LM201AVDR2G Features
8 Pins
supply voltage of 15V
104.08dB voltage gain
LM201AVDR2G Applications
There are a lot of ON Semiconductor LM201AVDR2G Instrumentational OP Amps applications.
- Comparator
- Radiation thermometry transducers
- Communication device
- High input resistance broadband
- Gaming industry
- Division circuits
- Differentiator circuits
- Information processing
- Video conversion and routing
- Fast A/D and D/A converters
