LM211D
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Dual Supply Voltage | 9V |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 3mV @ ±15V |
| Current - Input Bias (Max) | 0.1μA @ ±15V |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Max Power Dissipation | 710mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LM211 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 6mA |
| Power Dissipation | 710mW |
| Output Current | 50mA |
| Max Supply Current | 7.5mA |
| Propagation Delay | 200 ns |
| Quiescent Current | 6mA |
| Response Time | 200 ns |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±2.5V~15V |
| Output Current per Channel | 200pA |
LM211D Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output is used here.This device is designed in Tube case.The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 15V voltage.A comparator of this type is typically of type General Purpose .Electronic comparator has a total of 1 elements.The board includes 8 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~105°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions for your special requirements by searching LM211 .There is a quiescent current of 6mA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 6mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 7.5mA .According to the voltage formula, the part has a voltage gain of 106.02dB .Comparator electronics is necessary to have a voltage of 15V for normal operation.
LM211D Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211D Applications
There are a lot of STMicroelectronics LM211D linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Portable Battery Monitoring
- Battery-Powered Electronics
- Laptop Computers
- Factory automation & control
- Body Control Modules
- Mobile Communications
- Alarm and Monitoring Circuits
- Analog front end
- Building automation
