LM211DRE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM211 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 50mA |
| Max Supply Current | 6mA |
| Quiescent Current | 6mA |
| Response Time | 165 ns |
| Voltage - Supply, Single/Dual (±) | 3.5V~30V ±1.75V~15V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Max Input Current | 100nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 3mV @ ±15V |
| Current - Input Bias (Max) | 0.1μA @ ±15V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM211DRE4 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.This comparator is of the DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output type.This device is designed in Tape & Reel (TR) case.8 terminals are found on the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 15V .In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 1 elements.The device includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator consists of 8 pins.You may wish to search LM211 for more solutions that address your specific needs.There is a quiescent current of 6mA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 6mA .A current supply greater than 6mA may result in the comparator malfunctioning.You can input a maximum current of 100nA into this device.According to the voltage formula, the part has a voltage gain of 106.02dB .
LM211DRE4 Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211DRE4 Applications
There are a lot of Texas Instruments LM211DRE4 linear comparators applications.
- General Purpose Low Voltage Applications
- Factory automation & control
- Battery-Powered Electronics
- Body Control Modules
- Analog front end
- RC Timers
- Battery management and protection
- Portable and Battery-Powered Systems
- Pulse, Squarewave, and Time Delay Generators
- Limit Comparators
