LM211DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM211 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 50mA |
| Max Supply Current | 6mA |
| Quiescent Current | 6mA |
| Response Time | 165 ns |
| Voltage - Supply, Single/Dual (±) | 3.5V~30V ±1.75V~15V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Max Input Current | 100nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 3mV @ ±15V |
| Current - Input Bias (Max) | 0.1μA @ ±15V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM211DRG4 Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .There is a DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output type for this comparator.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 8 terminals.Electronic comparator is a part of Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 15V voltage.In terms of type, this is a typical General Purpose comparator.This element consists of 1 elements in total.A total of 8 pins are included.In general, mounting type Surface Mount is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search LM211 .This comparator presents a quiescent current of 6mA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 6mA .Current supply exceeding 6mA could cause disfunction of the compartator.Electronic comparator is possible to input a maximum of 100nA current into the device.The voltage formula shows that the part has a voltage gain of 106.02dB .For normal operation, there should be 28V operating supply voltage applied.This device can be used in general (for example, in ADC circuits). It is packaged in TR .
LM211DRG4 Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211DRG4 Applications
There are a lot of Texas Instruments LM211DRG4 linear comparators applications.
- Power management
- Portable Battery Monitoring
- General Purpose Low Voltage Applications
- Industrial
- Infotainment & cluster
- Security Detection Systems
- Power Supervision
- Alarm and Monitoring Circuits
- Point of load regulators
- Window Comparators
