LM211MDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM211 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 50mA |
| Max Supply Current | 6mA |
| Quiescent Current | 6mA |
| Response Time | 165 ns |
| Voltage - Supply, Single/Dual (±) | 3.5V~30V ±1.75V~15V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Max Input Current | 100nA |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 3mV @ ±15V |
| Current - Input Bias (Max) | 0.1μA @ ±15V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM211MDREP Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.Output type DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.With a 15V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .In total, it contains 1 elements.The device contains 8 pins.A Surface Mount mounting type is recommended.If you want to avoid malfunction, you should set the operating temperature to -55°C~125°C .Electronic comparator has 8 pins.Search LM211 to find more pin-to-pin solutions.There is 6mA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.The nominal supply current of the device should be 6mA for normal use.If the current supply exceeds 6mA , the comparator might be damaged.Input current to the device cannot exceed 100nA .From the voltage formula, the voltage gain of the part is 106.02dB .The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LM211MDREP Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -55°C~125°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211MDREP Applications
There are a lot of Texas Instruments LM211MDREP linear comparators applications.
- Point of load regulators
- Current and voltage sensing
- Portable and Battery-Powered Systems
- Mobile Phones and Tablets
- RC Timers
- Wireless Base Stations
- Multivibrators and High-Voltage Digital Logic Gates
- System control and monitoring
- Body Control Modules
- Battery-Powered Electronics
