Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Weight |
440.409842mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
2.54mm |
Base Part Number |
LM211 |
Pin Count |
8 |
Output Type |
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
Operating Supply Voltage |
28V |
Number of Circuits |
1 |
Nominal Supply Current |
6mA |
Output Current |
50mA |
Max Supply Current |
6mA |
Quiescent Current |
6mA |
Response Time |
115 ns |
Voltage - Supply, Single/Dual (±) |
3.5V~30V ±1.75V~15V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
3mV |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Voltage Gain |
106.02dB |
Dual Supply Voltage |
9V |
Input Bias Current |
100nA |
Voltage - Input Offset (Max) |
3mV @ ±15V |
Current - Input Bias (Max) |
0.1μA @ ±15V |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM211P Overview
The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.There is a DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output type for this comparator.The chip is packaged with Tube .8 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.In the presence of a 15V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as General Purpose .The board includes 8 pins.Electronic comparator is recommended to mount using type Through Hole .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LM211 .A quiescent current of 6mA is observed in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 6mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 6mA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .A normal operation requires a voltage of 28V .
LM211P Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211P Applications
There are a lot of Texas Instruments LM211P linear comparators applications.
- Battery-Powered Electronics
- Window Comparators
- Alarm and Monitoring Circuits
- Analog front end
- Infotainment & cluster
- Notebooks and PDAs
- Wearable Devices
- Motor drives
- Laptop Computers
- System control and monitoring