Parameters |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
8 |
Weight |
39.008944mg |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Comparator |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Terminal Pitch |
0.65mm |
Pin Count |
8 |
Output Type |
TTL |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
1 |
Max Supply Voltage |
30V |
Min Supply Voltage |
3.5V |
Nominal Supply Current |
6mA |
Max Supply Current |
6mA |
Current - Output |
50mA |
Quiescent Current |
6mA |
Response Time |
115 ns |
Current - Input Bias |
300nA |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
3mV |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Voltage Gain |
106.02dB |
Max Dual Supply Voltage |
15V |
Min Dual Supply Voltage |
1.75V |
Max Input Current |
100nA |
Length |
4.4mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
LM211PWE4 Overview
The product is packaged in TSSOP for ease of transportation.There is a TTL output type for this comparator.The comparator has 8 terminals.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 15V voltage.Electronic comparator can be classified as a General Purpose chip.The device includes 8 pins.8 pins are available on the comparator.A quiescent current of 6mA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.Normally, the nominal supply current should be 6mA when using the device.Current supply exceeding 6mA could cause disfunction of the compartator.Input current to the device is limited to 100nA .The voltage formula shows that the part has a voltage gain of 106.02dB .Comparator electronics is not recommended to operate the system at a temperature above 85°C .Lower temperatures than -40°C are unsuitable for it.A comparator's maximum supply voltage is 30V .A minimum supply voltage of 3.5V is allowed for this comparator.1 channels cooperate together to maintain the output quality.50mA is the output current of this device.
LM211PWE4 Features
TTL output capability
General Purpose IC
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211PWE4 Applications
There are a lot of Texas Instruments LM211PWE4 linear comparators applications.
- Battery-Powered Electronics
- Power Supervision
- Consumer Medical Electronics
- Automotive
- Security Detection Systems
- Hand-Held Electronics
- General Purpose Low Voltage Applications
- General-Purpose Portable Devices
- Threshold Detectors
- Appliances