LM211PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM211 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 50mA |
| Max Supply Current | 6mA |
| Quiescent Current | 6mA |
| Response Time | 165 ns |
| Voltage - Supply, Single/Dual (±) | 3.5V~30V ±1.75V~15V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Max Input Current | 100nA |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 3mV @ ±15V |
| Current - Input Bias (Max) | 0.1μA @ ±15V |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM211PWR Overview
The product is packaged in 8-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.There is a comparator of type DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output on this device.We ship the part through Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 15V .In terms of type, this is a typical General Purpose comparator.A total of 1 elements can be found in it.As a result, it contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator has 8 pins.You can find more pin-to-pin solutions for your special requirements by searching LM211 .In this comparator, the quiescent current is 6mA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 6mA in order to use the device normally.A current supply greater than 6mA may result in the comparator malfunctioning.Input current to the device is limited to 100nA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .With a TR package, this device is designed for general use (usually in ADC circuits).
LM211PWR Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211PWR Applications
There are a lot of Texas Instruments LM211PWR linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators, Multivibrators
- Lithium ion battery monitoring
- Body Control Modules
- Infotainment & cluster
- Zero-Crossing Detectors
- Automotive
- Building automation
- High-Speed Sampling Circuits
- Laptop Computers
