LM211QD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM211 |
| Pin Count | 8 |
| Output Type | DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 1 |
| Nominal Supply Current | 6mA |
| Output Current | 50mA |
| Max Supply Current | 6mA |
| Quiescent Current | 6mA |
| Response Time | 165 ns |
| Voltage - Supply, Single/Dual (±) | 3.5V~30V ±1.75V~15V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 3mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 106.02dB |
| Dual Supply Voltage | 9V |
| Input Bias Current | 100nA |
| Voltage - Input Offset (Max) | 3mV @ ±15V |
| Current - Input Bias (Max) | 0.1μA @ ±15V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM211QD Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.There is a DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output type for this comparator.The part is shipped by Tube .As you can see, the comparator has8 terminals.The electrical component here belongs to the Comparator family.With a 15V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.There are a total of 1 elements in it.The device contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator has 8 pins.You can search LM211 if you are looking for more pin-to-pin solutions.There is a quiescent current of 6mA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 6mA in order to use the device normally.A current supply greater than 6mA may result in the comparator malfunctioning.The voltage formula shows that the part has a voltage gain of 106.02dB .In order to operate normally, a supply voltage of 0 is required.
LM211QD Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211QD Applications
There are a lot of Texas Instruments LM211QD linear comparators applications.
- Battery-Powered Electronics
- Security Detection Systems
- Zero-Crossing Detectors
- Automatic Test Equipment
- Current and voltage sensing
- Set Top Boxes
- General Purpose Low Voltage Applications
- Analog front end
- Notebooks and PDAs
- Metering Systems
