Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Base Part Number |
LM211 |
Pin Count |
8 |
Output Type |
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL |
Number of Elements |
1 |
Nominal Supply Current |
-5mA |
Output Current |
50mA |
Max Supply Current |
-5mA |
Quiescent Current |
6mA |
Response Time |
165 ns |
Voltage - Supply, Single/Dual (±) |
3.5V~30V ±1.75V~15V |
Input Offset Voltage (Vos) |
3mV |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Voltage Gain |
106.02dB |
Max Input Current |
100nA |
Input Bias Current |
100nA |
Current - Quiescent (Max) |
6mA |
Voltage - Input Offset (Max) |
3mV @ ±15V |
Current - Input Bias (Max) |
0.1μA @ ±15V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LM211QDRG4Q1 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.The comparator has an output type of DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL .Ready for shipping in Tape & Reel (TR) package.Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 15V voltage.When it comes to types, this comparator is a typical General Purpose .A total of 1 elements can be found in it.As a result, it contains 8 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~125°C .The comparator is equipped with 8 pins.In order to find a solution that meets your specific needs, search LM211 for more pin-to-pin solutions.A quiescent current of 6mA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.For normal use of the device, the nominal supply current should be -5mA .If the current supply exceeds -5mA , the comparator might be damaged.A maximum current of 100nA can be supplied to the device.According to the voltage formula, the part has a voltage gain of 106.02dB .In this case, the part is from the Automotive, AEC-Q100 comparator series.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
LM211QDRG4Q1 Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB
LM211QDRG4Q1 Applications
There are a lot of Texas Instruments LM211QDRG4Q1 linear comparators applications.
- Notebooks and PDAs
- Window Comparators
- Alarm and Monitoring Circuits
- High-Speed Sampling Circuits
- Laptop Computers
- Power management
- High-Speed Differential Line Receiver
- Zero-Crossing Detectors
- Battery-Powered Electronics
- Mobile Phones