LM224J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.26W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM224 |
| Pin Count | 14 |
| Operating Supply Voltage | 16V |
| Power Supplies | 5/30V |
| Number of Channels | 4 |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 700μA |
| Power Dissipation | 1.26W |
| Output Current | 20mA |
| Max Supply Current | 1.2mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 45nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.67mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LM224J Overview
The linear amplifier is packaged in a 14-CDIP (0.300, 7.62mm) case. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. During the past two weeks, there have been close to 14 terminations. In total, there are 14 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 5mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Through Hole. It is important to note that this linear amplifier works well at a temperature of -25°C~85°C when it comes to operating temperatureA supply current of 1.5mA can be used to operate this linear amplifier. The voltage gain should stay at 100dB. There are a total of 4 channels available on the op amps. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
LM224J Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM224J Applications
There are a lot of Texas Instruments LM224J Instrumentational OP Amps applications.
- Information processing
- Industrial control system
- Displayers for aircraft and air transportation control systems
- Portable docking station
- Band-stop filter
- Automation control systems
- Portable media players
- Blood pressure sensors
- Television broadcasting equipment
- Inverse/same-phase proportional circuit
