LM224KN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM224 |
| Pin Count | 14 |
| Operating Supply Voltage | 16V |
| Number of Elements | 4 |
| Power Supplies | +-1.5/+-16/3/32V |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 3mA |
| Output Current | 30mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1.2MHz |
| Unity Gain BW-Nom | 1200 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 32V |
| Voltage - Input Offset | 3mV |
| Current - Output / Channel | 40mA |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM224KN Overview
Packaged in a 14-DIP (0.300, 7.62mm) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the General Purpose-type. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 14. A total of 14 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 14 pins are available on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 5mV. For this electronic part, it is recommended that you mount it with type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -25°C~85°C . Operational amplifier can operate supply current at 1.4mA. The voltage gain should stay at 100dB. The total number of elements in this buffer amplifier is 4. The operating supply voltage of the buffer op amp is rated at 16V.
LM224KN Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM224KN Applications
There are a lot of Texas Instruments LM224KN Instrumentational OP Amps applications.
- Home audio systems
- pH (acidity)
- Scintillation detectors
- Portable docking station
- Video computer boards
- Thermocouples
- Gaming industry
- Commercial audio systems
- E-book readers
- Proportional counter tubes
