LM224NG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | LAST SHIPMENTS (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM224 |
| Pin Count | 14 |
| Operating Supply Voltage | 16V |
| Power Supplies | 5/30V |
| Number of Channels | 4 |
| Operating Supply Current | 1.4mA |
| Nominal Supply Current | 1.2mA |
| Output Current | 40mA |
| Slew Rate | 0.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 90nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2mV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Height | 6.35mm |
| Length | 6.35mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LM224NG Overview
In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. The op amp is delivered to you in a Tube case. The number of terminations is approaching the 14 mark. The pins on this board total to 14 in total. It is important to remember that this op amp should be operated at a voltage of 5V volts. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 14 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -25°C~85°C. Using a supply current of 1.4mA , this buffer op amp will be able to operate. Op amp is a member of the 100dB's 100dB family. As far as the device is concerned, buffer amplifier has 4 channels. The operating supply voltage of the buffer op amp is rated at 16V. To pack the operational amplifier ics, RAIL is adopted as the packing method.
LM224NG Features
14 Pins
supply voltage of 5V
100dB voltage gain
LM224NG Applications
There are a lot of ON Semiconductor LM224NG Instrumentational OP Amps applications.
- Fast A/D and D/A converters
- Semiconductor detectors
- Proportional operation circuits
- E-book readers
- Test and measurement instruments
- Voltage regulation circuit
- Video data acquisition
- Subtraction operation circuits
- Professional videography
- Displayers for aircraft and air transportation control systems
