LM22680QMR-ADJ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100, SIMPLE SWITCHER® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | LM22680 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 42V |
| Output Voltage | 1.285V |
| Output Type | Adjustable |
| Max Output Current | 2A |
| Operating Supply Voltage | 42V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 3.4mA |
| Max Output Voltage | 37V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.285V |
| Voltage - Output (Max) | 37V |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM22680QMR-ADJ/NOPB Overview
This harley voltage regulator utilizes the Tube package for optimized performance. A voltage regulator consists of 8 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Space savings are achieved by placing this voltage regulator in the 8-PowerSOIC (0.154, 3.90mm Width) package. 1 outputs of voltage regulator are configured. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. A Surface Mount mounting is required for this switching regulator. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. The switching frequency of this DC-DC switching regulator reaches 500kHz. This voltage regulator is able to operate with the minimal input voltage of 4.5V. 42V volts is DC DC switching regulator's maximum input voltage. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. An input voltage of 12V is required to meet the requirements of the switching regulator operation. This DC/DC regulator belongs to the LM22680 family. A voltage of 1.285V volts can be generated by DC DC switching regulator. The switching regulator operation of the system is controlled by 8 pins. The output voltage of this voltage regulator 12v should at least be set at 1.285V volts at all times. A maximum output current of 2A A is available to meet the switching regulator operation requirements. 37V's maximal output voltage allows adjusting voltage regulator to operate easily. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 37V. This voltage regulator belongs to the Automotive, AEC-Q100, SIMPLE SWITCHER? family and is known as a switching DC-DC regulator. DC-DC switching regulator with supply voltage 42V. Voltage regulator consumes 3.4mA A of quiescent current without being affected by outside forces.
LM22680QMR-ADJ/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
Operating supply voltage of 42V
LM22680QMR-ADJ/NOPB Applications
There are a lot of Texas Instruments LM22680QMR-ADJ/NOPB Voltage Regulators applications.
- Smoke prevention equipment
- Domestic water pumps
- Gear/thread machining machines
- Game consoles
- Motor controller circuits
- Experimental setup
- CNC system
- Constant current circuits
- Correction machines
- Window air conditioners
