LM239AMPWREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM239 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2.5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM239AMPWREP Overview
To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a type CMOS, MOS, Open-Collector, TTL output.This device is designed in Tape & Reel (TR) case.The comparator has 14 terminals.The component belongs to the Comparator family of electrical components.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.A comparator of this type is typically of type Differential .A total of 4 elements can be found in it.There are 14 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .Ideally, the operating temperature should be set at -55°C~125°C in order to prevent malfunction.The comparator has a pin count of 14 .You may wish to search LM239 for more solutions that address your specific needs.There is 2mA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 2mA supply current.A current supply greater than 2mA may cause the comparator to malfunction.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Input current to the device cannot exceed 250nA .The voltage gain of the part is indicated by 106.02dB in the voltage formula.This device is usually used in ADC circuits (packaged in TR ).
LM239AMPWREP Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -55°C~125°C
Quiescent Current: 2mA
Voltage Gain: 106.02dB
LM239AMPWREP Applications
There are a lot of Texas Instruments LM239AMPWREP linear comparators applications.
- Wireless Base Stations
- Battery management and protection
- General Purpose Low Voltage Applications
- High-Speed Sampling Circuits
- Multivibrators and High-Voltage Digital Logic Gates
- Mobile Communications
- Wearable Devices
- Body Control Modules
- Wide Range VCO; MOS Clock Timers
- System control and monitoring
