LM239AQDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM239 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Response Time | 300 ns |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 2.5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 20mA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM239AQDRG4Q1 Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, MOS, Open-Collector, TTL is being used.This device is designed in Tape & Reel (TR) case.Electronic comparator is possible to find the 14 terminals of the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.It's a typical Differential comparator.A total of 14 pins are included.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.Electronic comparator has 14 pins.You can find more pin-to-pin solutions by searching LM239 .There is 2mA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires 2mA supply current.The compartator could be damaged if the current supply exceeds 2mA .The device can be operated with 5V power supplies.Electronic comparator is possible to input a maximum of 250nA current into the device.The voltage formula shows that the part has a voltage gain of 106.02dB .To ensure a high level of output quality, 4 channels work together.The part belongs to the series of comparator Automotive, AEC-Q100 .The device is acceptable to pack by TR .
LM239AQDRG4Q1 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Operates under -40°C~125°C
Quiescent Current: 2mA
Voltage Gain: 106.02dB
LM239AQDRG4Q1 Applications
There are a lot of Texas Instruments LM239AQDRG4Q1 linear comparators applications.
- General-Purpose Portable Devices
- Infotainment & cluster
- DC/DC and AC/DC power supplies
- Mobile Phones and Tablets
- Automatic Test Equipment
- Infotainment and Clusters
- Current and voltage sensing
- Point of load regulators
- Laptop Computers
- Factory automation & control
