LM239D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Published | 2007 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -25°C |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | OPEN-COLLECTOR |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 3V |
| Power Dissipation-Max | 1W |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Max Supply Current | 2mA |
| Current - Output | 6mA |
| Quiescent Current | 800μA |
| Response Time | 1.3 μs |
| Amplifier Type | COMPARATOR |
| Current - Input Bias | 250nA |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 1.5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
LM239D Overview
For convenience, it is packaged in SOIC .Output type of this comparator is OPEN-COLLECTOR .There are 14 terminals on the comparator.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Currently, it consists of only 4 elements.Electronic comparator has 14 pins.14 pins are available on the comparator.The comparator displays a quiescent current of 800μA .The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 2mA supply current.An excess of current supply over 2mA could result in malfunction of the comparator.5V power supplies are enough to run the device.From the voltage formula, the voltage gain of the part is 106.02dB .Temperatures above 85°C are not recommended.Comparator electronics cannot be operated at temperatures below -25°C .In the comparator, the maximum supply voltage is 36V .Comparator electronics is possible to supply this comparator wComparator electronicsh a voltage as low as 3V .Comparators have a very high gain COMPARATOR amplifier.This device's output current is rated at 6mA .
LM239D Features
OPEN-COLLECTOR output capability
Employing 4 elements
Quiescent Current: 800μA
Voltage Gain: 106.02dB
COMPARATOR amplifier
LM239D Applications
There are a lot of ON Semiconductor LM239D linear comparators applications.
- Industrial
- Automotive
- Battery-Powered Electronics
- Metering Systems
- General-Purpose Portable Devices
- Infotainment and Clusters
- Multivibrators and High-Voltage Digital Logic Gates
- Zero-Crossing Detectors
- Limit Comparators
- Laptop Computers
