LM239DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C |
| Packaging | Cut Tape (CT) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM239 |
| Pin Count | 14 |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM239DR2G Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Open-Collector, TTL output is used here.Ready for shipping in Cut Tape (CT) package.There are14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 4 elements in total.Electronic comparator includes 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -25°C~85°C to prevent malfunctions.The comparator has a pin count of 14 .If you require more pin-to-pin solutions, search LM239 for more options.There is a quiescent current of 2.5mA in this comparator.Normal operation of the device requires 2mA supply current.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 2mA .In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum current of 250nA into the device.In accordance with the voltage formula, the part's voltage gain is 106.02dB .
LM239DR2G Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM239DR2G Applications
There are a lot of ON Semiconductor LM239DR2G linear comparators applications.
- Motor drives
- Factory automation & control
- General-Purpose, Low-Voltage Applications
- Battery-Powered Electronics
- Mobile Communications
- High-Speed Sampling Circuits
- Multivibrators and High-Voltage Digital Logic Gates
- Limit Comparators
- Battery management and protection
- Wide Range VCO; MOS Clock Timers
