LM239DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LM239 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM239DRG4 Overview
Electronic comparator is packaged in 14-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a CMOS, MOS, Open-Collector, TTL output.We ship the part through Tape & Reel (TR) .There are14 terminals on the comparator.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.It's a typical Differential comparator.There are a total of 4 elements in it.There are 14 pins on this board.The type of mounting recommended is Surface Mount .A temperature setting of -25°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator is equipped with 14 pins.You can find more pin-to-pin solutions for your special requirements by searching LM239 .A quiescent current of 2mA is displayed by this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal operation of the device requires a nominal supply current of 2mA .An excess of current supply over 2mA could result in malfunction of the comparator.The device can be run with 5V power supplies.Electronic comparator is possible to input a maximum current of 250nA into the device.Comparator electronics follows that the voltage gain of the part is 106.02dB .The operating supply voltage for normal operation should be 28V .Packed in TR , this device is for general uses (often in ADC circuits).
LM239DRG4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -25°C~85°C
Quiescent Current: 2mA
Voltage Gain: 106.02dB
LM239DRG4 Applications
There are a lot of Texas Instruments LM239DRG4 linear comparators applications.
- Consumer Medical Electronics
- Zero-Crossing Detectors
- Mobile Phones and Tablets
- Security Detection Systems
- General Purpose Low Voltage Applications
- Window Comparators, Multivibrators
- Zero-Crossing Detectors
- Limit Comparators
- Set Top Boxes
- Infotainment and Clusters
