LM239DTBR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparators |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | LM239 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 1W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2.5mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LM239DTBR2 Overview
A convenient packaging is provided in the form of 14-TSSOP (0.173, 4.40mm Width) .Output type CMOS, Open-Collector, TTL is used for this comparator.This package has been designed with Tape & Reel (TR) .Electronic comparator is possible to find the 14 terminals of the comparator.The electrical component in this case belongs to the Comparators family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.This is a typical comparator of type General Purpose .This is a 4 element comparator.As a result, it contains 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -25°C~85°C .The comparator has a pin count of 14 .You can find more pin-to-pin solutions by searching LM239 .A quiescent current of 2.5mA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 2mA .A supply current exceeding 2mA may result in the comparator malfunctioning.A power supply of 5V is sufficient for the operation of the device.You can input a maximum current of 250nA into this device.The voltage formula shows that the part has a voltage gain of 106.02dB .
LM239DTBR2 Features
CMOS, Open-Collector, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM239DTBR2 Applications
There are a lot of ON Semiconductor LM239DTBR2 linear comparators applications.
- Hand-Held Electronics
- Wide Range VCO; MOS Clock Timers
- Alarm and Monitoring Circuits
- Limit Comparators
- Mobile Communications
- Battery management and protection
- Wireless Base Stations
- High-Speed Differential Line Receiver
- Automotive
- Motor drives
