LM239PWRE4
| Parameters | |
|---|---|
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LM239 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector, TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 2mA |
| Output Current | 20mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~30V ±1V~15V |
| Output Current per Channel | 6mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 106.02dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Differential |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
LM239PWRE4 Overview
For convenience, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has a CMOS, MOS, Open-Collector, TTL output.Electronic comparator is shipped by Tape & Reel (TR) .The device is designed with 14 terminations.The electrical component in this case belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.When it comes to types, this comparator is a typical Differential .Currently, it consists of only 4 elements.Electronic comparator includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .As a precaution, it is recommended to set the operating temperature to -25°C~85°C to prevent malfunctions.This comparator has 14 pins.If you require more pin-to-pin solutions, search LM239 for more options.There is a quiescent current of 2mA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 2mA in order to use the device normally.If the current supply exceeds 2mA , the comparator might be damaged.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.You are allowed to input a maximum current of 250nA into the device.In accordance with the voltage formula, the part's voltage gain is 106.02dB .Packed in TR , this device is for general uses (often in ADC circuits).
LM239PWRE4 Features
CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under -25°C~85°C
Quiescent Current: 2mA
Voltage Gain: 106.02dB
LM239PWRE4 Applications
There are a lot of Texas Instruments LM239PWRE4 linear comparators applications.
- Wireless Base Stations
- Limit Comparators
- Automotive
- High-Speed Differential Line Receiver
- High-Speed Sampling Circuits
- Power management
- Consumer Medical Electronics
- System control and monitoring
- Mobile Phones and Tablets
- Point of load regulators
