LM25011AMYE
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM25011 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 42V |
| Output Voltage | 40V |
| Output Type | Adjustable |
| Max Output Current | 2A |
| Operating Supply Voltage | 42V |
| Voltage - Input (Min) | 6V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 1.2mA |
| Max Output Voltage | 40V |
| Topology | Buck |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | Up to 2MHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 2.51V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25011AMYE Overview
For optimal performance, this voltage regulator makes use of the Tape & Reel (TR) package. This harley voltage regulator has 10 terminations. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. In order to save space, this voltage regulator is packaged in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. 1 outputs of voltage regulator are configured. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. Surface Mount-mounting is compatible with this switching regulator. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~125°C TJ. In this voltage regulator 12v, the switching frequency is Up to 2MHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. Voltage regulator has an input voltage (Max) of 42V. A regulator with this 260 peak reflow temperature is essentially indestructible. An input voltage of 12V is required for switching regulator operation. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. As a member of the LM25011 family of DC/DC regulators, this is a DC/DC regulator. There is a possibility that DC DC switching regulator can give voltage at 40V volts. 10 pins are used for switching regulator operation. There should be at least a 2.51V volt output voltage for this switching regulator in order to make it work properly. For switching regulator maximum operation, dc to dc voltage regulator delivers 2A A. A maximum voltage of 40V can be obtained from the regulator voltage. DC-DC switching regulator with supply voltage 42V. Voltage regulator consumes 1.2mA A of quiescent current without being affected by external factors. A 12V V supply is sufficient for the operation of this voltage regulator dc to dc.
LM25011AMYE Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 42V
LM25011AMYE Applications
There are a lot of Texas Instruments LM25011AMYE Voltage Regulators applications.
- Ball screw pair
- Automation technology
- Planers
- Motor controller circuits
- Digital precision reference circuits
- Imported equipment
- Electric heating, lighting
- Plate bending machines
- Flexible manufacturing cells
- Wind power
