LM25037MT/NOPB

16 Terminals 5.5V~75V 16-Pin LM25037 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~515kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-LM25037MT/NOPB
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 971
Description: 16 Terminals 5.5V~75V 16-Pin LM25037 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~515kHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Output Voltage	200mV
Output Type	Transistor Driver
Input Voltage-Nom	12V
Number of Channels	2
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	45μA
Output Configuration	Positive, Isolation Capable
Output Current	100mA
Voltage - Supply (Vcc/Vdd)	5.5V~75V
Output Power	50W
Control Features	Current Limit, Dead Time Control, Enable, Ramp, Soft Start
Topology	Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	200kHz~515kHz
Control Technique	PULSE WIDTH MODULATION
Rise Time	17ns
Synchronous Rectifier	No
Fall Time (Typ)	18 ns
Nominal Input Voltage	75V
Max Duty Cycle	96 %
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Additional Feature	IT ALSO OPERATES IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Frequency	178kHz
Base Part Number	LM25037
Function	Step-Up/Step-Down
Number of Outputs	1

LM25037MT/NOPB Overview

It comes in the 16-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. A total of Transistor Driver dc switching's outputs can be handled by it. The supply and operating voltage of the dc control are 5.5V~75V. Worked in an dc switcher with a -40°C~125°C TJ rating. Switching can be done at 200kHz~515kHz with this switching controller. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Dead Time Control, Enable, Ramp, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . 16 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. LM25037 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 200mV voltage. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 96 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. A frequency of 178kHz is used by the switching controller. In order to satisfy the need, DC to DC voltage regulator has a value of IT ALSO OPERATES IN CURRENT MODE. It is possible to set the input voltage to 75V for nominal working status. There is a 45μA volt supply current. There are 2 channels for high-quality communication.

LM25037MT/NOPB Features

Transistor Driver Outputs
Switching Frequency: 200kHz~515kHz
Current Limit, Dead Time Control, Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 178kHz
IT ALSO OPERATES IN CURRENT MODE