LM25037MTX/NOPB

16 Terminals 5.5V~75V 16-Pin LM25037 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~515kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-LM25037MTX/NOPB
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 229
Description: 16 Terminals 5.5V~75V 16-Pin LM25037 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 200kHz~515kHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Frequency	2MHz
Base Part Number	LM25037
Function	Step-Up/Step-Down
Number of Outputs	1
Output Voltage	7.7V
Output Type	Transistor Driver
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive, Isolation Capable
Output Current	1.2A
Voltage - Supply (Vcc/Vdd)	5.5V~75V
Output Power	50W
Control Features	Current Limit, Dead Time Control, Enable, Ramp, Soft Start
Input Voltage (Min)	5.5V
Topology	Full-Bridge, Half-Bridge, Push-Pull
Control Mode	VOLTAGE-MODE
Frequency - Switching	200kHz~515kHz
Input Voltage (Max)	75V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Duty Cycle (Max)	96%
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Additional Feature	IT ALSO OPERATES IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL

LM25037MTX/NOPB Overview

In the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's5.5V~75V is the supply voltage and the operating voltage of the dc control. A -40°C~125°C TJ dc switcher is not a problem. In this switching controller, the switch can be set to 200kHz~515kHz. The Surface Mount makes it ideal for general dc dc regulator. Current Limit, Dead Time Control, Enable, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at DUAL . 16 terminations with a variety of function. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Searching "LM25037" will return other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 5.5V. The test statistics indicate that DC regulator outputs a voltage of 7.7V. It should be noted that the dc to dc regulator only accepts 75V voltage as input voltage. normally, the dc dc regulator's output current is 1.2A, which you should keep in mind when starting a project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controllers work at 2MHz Hz. The value of DC to DC voltage regulator is set at IT ALSO OPERATES IN CURRENT MODE in order to fulfill the requirements more effectively.

LM25037MTX/NOPB Features

Transistor Driver Outputs
Switching Frequency: 200kHz~515kHz
Current Limit, Dead Time Control, Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Frequency: 2MHz
IT ALSO OPERATES IN CURRENT MODE