LM25061PMM-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Latched Fault |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.6 VOLT |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.9V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Depth | 3.1mm |
| Base Part Number | LM25061 |
| Pin Count | 10 |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 2.4mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, UVLO |
| Feature Pins | FB, PGD, TIMER, (UVLO, EN) |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25061PMM-1/NOPB Overview
In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package you will find it.Currently, there are 1 channels accessible.It's?packaged?in?the?form?of?a?Tape & Reel (TR).The 10 terminations total to three.In this case, the device is located at terminal DUAL.In total, it has 10 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 12V.Surface Mount is set up this way.This electrical component belongs to the Hot Swap Controller classification.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.In Latched Fault, it is featured.In the case of a 2.9V~17VV power source, it should work just fine.This number is a member of the LM25061 family.In order to operate, 10 pins are used.Power Management Circuits contains this gadget on its own.The programmable features of this device are Current Limit, Fault Timeout, UVLO.The current supply of 1.6mA.Surface Mount is the direction in which it is positioned.To ensure normal operation, the supply voltage (Vsup) must be kept above 2.9V.Its maximum supply current for operation is 2.4mA.Using this device, RESET THRESHOLD VOLTAGE IS 2.6 VOLT can also be produced.
LM25061PMM-1/NOPB Features
The terminal position of 10
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, UVLO
LM25061PMM-1/NOPB Applications
There are a lot of Texas Instruments LM25061PMM-1/NOPB hot swap controllers applications.
- Distributed power systems
- Reverse current protection
- Automotive circuits
- Circuit breakers for high-side circuits
- Industrial high-side switches
- Circuit power protectors
- Network router
- Overvoltage protection
- Datacom
- USB interface
