LM25061PMME-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Latched Fault |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.6 VOLT |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.9V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM25061 |
| Pin Count | 10 |
| Output Voltage | 19.5V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 2.4mA |
| Nominal Input Voltage | 17V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, UVLO |
| Feature Pins | FB, PGD, TIMER, (UVLO, EN) |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25061PMME-1/NOPB Overview
You get it with the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.1 channels are currently available.Tape & Reel (TR)-shaped packaging is used for this product.The 10 terminations total to three.This device has a terminal position of DUAL.In total, there are 10 pins on it.With a supply voltage of 12V, high efficiency is possible.It's?set?up?in?the?way?of?Surface Mount.This electrical component is classified as Hot Swap Controller.A temperature setting of -40°C~85°C will ensure reliable operation.Devices with General Purpose applications are available.In Latched Fault, it is featured.Using a 2.9V~17VV power source should be able to power the device.LM25061 is a family of numbers.During operation, 10 pins are used.This gadget is self-contained in?Power Management Circuits.Current Limit, Fault Timeout, UVLO features are programmable.Presently, there is a limited supply of 1.6mA.In Surface Mount direction, it is positioned.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.9V so that the device can function normally.2.4mA is its maximum supply current.By using this device, it is also possible to produce RESET THRESHOLD VOLTAGE IS 2.6 VOLT.High efficiency is feasible with a 19.5V output voltage.
LM25061PMME-1/NOPB Features
The terminal position of 10
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, UVLO
Output voltage of 19.5V
LM25061PMME-1/NOPB Applications
There are a lot of Texas Instruments LM25061PMME-1/NOPB hot swap controllers applications.
- Overvoltage protection
- Servers
- High power circuit board
- Base station
- Storage network
- Server backplane system
- Undervoltage protection
- Network router
- Hard drive
- Data communication systems
