LM25061PMMX-2/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Auto Retry |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.6 VOLT |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.9V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LM25061 |
| Pin Count | 10 |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 2.4mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, UVLO |
| Feature Pins | FB, PGD, TIMER, (UVLO, EN) |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25061PMMX-2/NOPB Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains it.Channel 1 is currently available.There is a Tape & Reel (TR)-shaped package for it.Total terminations are 10.The terminal position of the device is DUAL.The device consists of a total of 10 pins.High efficiency can be achieved with a voltage supply of 12V.There is a Surface Mount-like arrangement.This electrical component belongs to the Hot Swap Controller classification.If you want reliable performance, you should set the temperature to -40°C~85°C.General Purpose applications can be downloaded from the device.The article is featured in Auto Retry.Hot-swappable device should work if you use a 2.9V~17VV power source.This number is a member of the LM25061 family.10 pins are used to operate the system.In Power Management Circuits, this gadget is self-contained.There are Current Limit, Fault Timeout, UVLO programmable features on this device.Presently, there is a sufficient supply of 1.6mA.In Surface Mount direction, it is positioned.To ensure normal operation, the supply voltage (Vsup) must be kept above 2.9V.A maximum supply current of 2.4mA is required for the device to operate.Using this device, you can also produce RESET THRESHOLD VOLTAGE IS 2.6 VOLT.
LM25061PMMX-2/NOPB Features
The terminal position of 10
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, UVLO
LM25061PMMX-2/NOPB Applications
There are a lot of Texas Instruments LM25061PMMX-2/NOPB hot swap controllers applications.
- Undervoltage protection
- Overvoltage protection
- Reverse current protection
- Telecom server
- Thermal limitation
- Continuous monitoring of device temperature
- Inrush current control
- Short circuit protection
- Current monitoring
- Other forms of communications infrastructure
