LM25069PMME-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Latched Fault |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.6 VOLT |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.9V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Depth | 3.1mm |
| Base Part Number | LM25069 |
| Pin Count | 10 |
| Output Voltage | 19.5V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 2.4mA |
| Nominal Input Voltage | 17V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, UVLO |
| Feature Pins | OVLO, PGD, TIMER, (UVLO, EN) |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25069PMME-1/NOPB Overview
The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains it.At present, 1 channels are available.Tape & Reel (TR)-shaped packaging is used.This device has a total of 10 terminations.This device has a terminal position of DUAL.In total, it has 10 pins.A supply voltage of 12V can result in high efficiency.It's?set?up?in?the?way?of?Surface Mount.This electrical component is classified as Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.The device has General Purpose applicationsThere is a mention of it in Latched Fault.Using a 2.9V~17VV power source should be able to power the device.There are numbers in the LM25069 family that include it.A 10 pin is used for operation.There is nothing else in Power Management Circuits but this gadget.The programmable features of this device are Current Limit, Fault Timeout, OVP, UVLO.Presently, 1.6mA is in short supply.The position of the object is in the direction of Surface Mount.Normally, Vsup should remain above 2.9V.This device's maximum supply current is 2.4mA.Through the use of this device, RESET THRESHOLD VOLTAGE IS 2.6 VOLT can also be produced.19.5V output voltage enables high efficiency.
LM25069PMME-1/NOPB Features
The terminal position of 10
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
Output voltage of 19.5V
LM25069PMME-1/NOPB Applications
There are a lot of Texas Instruments LM25069PMME-1/NOPB hot swap controllers applications.
- Short-circuit protection in real time
- Industrial
- Current monitor output
- Telecom server
- Active current limit
- Server backplane system
- Networking
- Electric vehicle
- Backplane
- Power monitoring
