LM25069PMME-2/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Auto Retry |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.6 VOLT |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.9V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Depth | 3.1mm |
| Base Part Number | LM25069 |
| Pin Count | 10 |
| Output Voltage | 19.5V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 2.4mA |
| Nominal Input Voltage | 17V |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, UVLO |
| Feature Pins | OVLO, PGD, TIMER, (UVLO, EN) |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25069PMME-2/NOPB Overview
As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, it is included.At the moment, there are 1 channels available.The package looks like a Tape & Reel (TR).Total terminations are 10.This device has a terminal position of DUAL.10 pins make up the entire device.High efficiency can be achieved when the supply voltage is 12V.Surface Mount has set it up this way.The electrical component in question falls into the classification Hot Swap Controller.A temperature setting of -40°C~85°C will ensure reliable operation.There are General Purpose applications on the device.Auto Retry features it.As long as you have a 2.9V~17VV power source, it should work.Numbers in the LM25069 family include it.10 pins are used to operate the system.Power Management Circuits contains this gadget all by itself.Hot-swappable device has Current Limit, Fault Timeout, OVP, UVLO programmable features.Presently, there is a sufficient supply of 1.6mA.In Surface Mount direction, it is positioned.Hot-swappable device is important that the supply voltage (Vsup) is kept above 2.9V for normal operation of the device.The maximum supply current for operation is 2.4mA.With the help of this device, RESET THRESHOLD VOLTAGE IS 2.6 VOLT can also be produced.High efficiency is feasible with a 19.5V output voltage.
LM25069PMME-2/NOPB Features
The terminal position of 10
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
Output voltage of 19.5V
LM25069PMME-2/NOPB Applications
There are a lot of Texas Instruments LM25069PMME-2/NOPB hot swap controllers applications.
- Overcurrent protection
- Load transient protection
- Modern analog communication
- Identify faulty boards
- Safe board insertion and extraction
- Servers
- Firewire
- Loads
- Continuous monitoring of device temperature
- ISDN system
