LM25069PMMX-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Latched Fault |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.6 VOLT |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.9V~17V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Depth | 3.1mm |
| Base Part Number | LM25069 |
| Pin Count | 10 |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 2.4mA |
| Internal Switch(s) | No |
| Programmable Features | Current Limit, Fault Timeout, OVP, UVLO |
| Feature Pins | OVLO, PGD, TIMER, (UVLO, EN) |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25069PMMX-1/NOPB Overview
As part of the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, it is included.Channel 1 is currently available.In the form of a Tape & Reel (TR), it is packaged.The 10 terminations total to three.In this case, the device is located at terminal DUAL.In total, it has 10 pins.The supply voltage 12V is necessary for high efficiency.Surface Mount sets it up.An electrical component classified as Hot Swap Controller belongs to this category.If you want reliable performance, you should set the temperature to -40°C~85°C.There are General Purpose applications available for the device.The article is featured in Latched Fault.Hot-swappable device should be able to work wHot-swappable deviceh a power source of 2.9V~17VV.Numbers in the LM25069 family include it.For operation, 10 pins are used.The gadget in Power Management Circuits is self-contained.Hot-swappable device has Current Limit, Fault Timeout, OVP, UVLO programmable features.There is currently an adequate supply of 1.6mA.In Surface Mount direction, it is positioned.For normal operation, the supply voltage (Vsup) should be kept above 2.9V in order to maintain a constant level of power.Its maximum supply current for operation is 2.4mA.The same device can also be used to produce RESET THRESHOLD VOLTAGE IS 2.6 VOLT.
LM25069PMMX-1/NOPB Features
The terminal position of 10
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
LM25069PMMX-1/NOPB Applications
There are a lot of Texas Instruments LM25069PMMX-1/NOPB hot swap controllers applications.
- Redundant Array of Disks (RAID)
- Remote access server
- Other forms of communications infrastructure
- PC board hot swap insertion and removal
- Backplane
- Network switches
- USB interface
- Thermal limitation
- Circuit breakers for electronic circuits
- Telecommunications
