LM25085AMM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25085 |
| Function | Step-Down |
| Output Voltage | 42V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 1.25mA |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Number of Output Phases | 1 |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25085AMM/NOPB Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller meets most application requirements. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~42V voltage are supplied and operated. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at Up to 1MHz. dc dc regulator is made easier with Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 8 terminations are available in dc switching. The DC switcher's nominal voltage is 24V. Searching "LM25085" will return other relevant dc to dc converter ics. Total pins of switching converter are 8. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. DC regulator outputs 42V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 1.75A, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. DC regulator has a maximum frequency of 1MHz. Users should apply 42V to operate the voltage regulator dc to dc safely and reliably. In dormant mode, 1.25mA is used. There are 1 phases in this controller.
LM25085AMM/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control
Max Duty Cycle: 100 %
LM25085AMM/NOPB Applications
There are a lot of Texas Instruments LM25085AMM/NOPB DC to DC converter applications.
- Low output voltage switching power supply circuits
- USB circuits
- Serial communication converter
- Sensitive electronic devices
- seismic instrument power circuits
- Bending machines
- Household control circuits
- Window air conditioners
- Computer monitoring equipment of building
- Precision electronic equipment
