LM25085AMYX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25085 |
| Function | Step-Down |
| Output Voltage | 42V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 1.25mA |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Number of Output Phases | 1 |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25085AMYX/NOPB Overview
With its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4.5V~42V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the Up to 1MHz position. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Current Limit, Frequency Control is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . A variety of terminations with 8 of dc switching. DC switcher's input voltageis set to 24V. Search for "LM25085" to find other relevant dc to dc converter ics. The switching converter has a total of 8 pins. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. The test statistics indicate that DC regulator outputs a voltage of 42V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1.75A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. DC regulator1MHz has the maximum frequency. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 42V. The dc switching utilizes 1.25mA when it is in a dormant state. With this controller, the phase is 1.
LM25085AMYX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control
Max Duty Cycle: 100 %
LM25085AMYX/NOPB Applications
There are a lot of Texas Instruments LM25085AMYX/NOPB DC to DC converter applications.
- Series voltage regulation circuits
- Industrial controllers
- Solar power plants
- Flaw detection equipment
- Scientific testing
- Experimental setup
- Arc suppression circuits
- Thermal power
- Product testing
- Current source circuits
