LM25085MMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25085 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 1.25mA |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25085MMX/NOPB Overview
The switching controller fits in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. For outputs of 1, this dc motor controller is suitable. There is a Tape & Reel (TR) solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. A 4.5V~42V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at Up to 1MHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. An array of 8 terminations of dc switching. There is a DC switcher's nominal voltage of 24V. A search for "LM25085" will reveal other relevant dc to dc converter ics. 8 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Based on the test statistics, DC regulator outputs voltage 42V. You should note that the dc dc regulator's usual output current is 1.75A. The maximum duty cycle of this voltage regulator dc to dc is set to 100 % to ensure reliability during power-up and power-down. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator's maximum frequency is 1MHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 42V. The dc switching utilizes 1.25mA when it is in a dormant state.
LM25085MMX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control
Max Duty Cycle: 100 %
LM25085MMX/NOPB Applications
There are a lot of Texas Instruments LM25085MMX/NOPB DC to DC converter applications.
- Printing
- CMM
- Computer rooms
- Household control circuits
- Magnetohydrodynamic power
- Program control systems
- Domestic water pumps
- Computer monitoring equipment of building
- Low output voltage switching power supply circuits
- Servo drive system
