LM25085MY/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25085 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 1.25mA |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25085MY/NOPB Overview
As a result of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 4.5V~42V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. The switching controller is capable of switching at the Up to 1MHz position. dc dc regulator can be generalized using Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Frequency Control. SWITCHING CONTROLLER analog IC connects the switch converters. DUAL are the position of the terminal of the switching converters. The 8 terminations can be used for a wide range of dc switching. DC switcher's input voltageis set to 24V. LM25085 can be used to locate other relevant dc to dc converter ics. Pins number 8 of switching converter in total. In particular, switching converter belongs to the Switching Regulator or Controllers family. dc dc voltage regulators should have a minimum input voltage of 4.5V. The test statistics indicate that DC regulator outputs a voltage of 42V. In most cases, the dc dc regulator's output current is 1.75A. This information should be noted when you begin working with the component. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. As long as the dc switching is in a dormant state, it utilizes 1.25mA.
LM25085MY/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control
Max Duty Cycle: 100 %
LM25085MY/NOPB Applications
There are a lot of Texas Instruments LM25085MY/NOPB DC to DC converter applications.
- Smoke exhaust equipment
- Computer rooms
- Direct power supply system
- PSRR circuits
- Scientific research
- Computer application technology
- Sensitive electronic devices
- Milling machines
- Printing
- Telecommunications equipment
