LM25085MYX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25085 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 1.25mA |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25085MYX/NOPB Overview
It comes in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, which makes switching controller suitable for most applications. dc motor controller is suitable for 1 output generation. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 4.5V~42V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~125°C TJ dc switcher. A switching controller such as this can switch at a value of Up to 1MHz . dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 8. The nominal DC switcher's voltage input is 24V. LM25085 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 42V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 1.75A. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. DC regulator's maximum frequency is 1MHz. A circuit should contain 42V in order to ensure the voltage regulator dc to dc runs safely and reliably. As long as the dc switching is in a dormant state, it utilizes 1.25mA.
LM25085MYX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control
Max Duty Cycle: 100 %
LM25085MYX/NOPB Applications
There are a lot of Texas Instruments LM25085MYX/NOPB DC to DC converter applications.
- Flexible manufacturing cells
- Hydrogen power
- Network technology
- CMM
- Product testing
- Mobile phones
- Correction machines
- Serial communication converter
- SMT equipment
- Industrial robots
