LM25085QMYX/NOPB
| Parameters | |
|---|---|
| Quiescent Current | 1.25mA |
| Control Features | Current Limit, Frequency Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Duty Cycle | 100 % |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25085 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.75A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
LM25085QMYX/NOPB Overview
Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. 1 outputs can be generated with the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). dc controls with 4.5V~42V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~125°C TJ. In this switching controller, the switch can be set to Up to 1MHz. The Surface Mount allows it to be used for dc dc regulator in general. Current Limit, Frequency Control is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. 8 terminations with a variety of function. The DC switcher's nominal voltage is 24V. You can find other relevant dc to dc converter ics by searching "LM25085". Pins number 8 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 4.5V. DC regulator outputs 42V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 1.75A, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. The Surface Mount makes DC switcher suitable for most applications and prototypes. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 42V. Thare are switch converters of the Automotive, AEC-Q100 series. In dormant mode, 1.25mA is used.
LM25085QMYX/NOPB Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control
Max Duty Cycle: 100 %
LM25085QMYX/NOPB Applications
There are a lot of Texas Instruments LM25085QMYX/NOPB DC to DC converter applications.
- Automation technology
- Printing
- Flaw detection equipment
- Computed tomography (CT)
- Sensitive electronic devices
- Die casting equipment
- Window air conditioners
- Precision electronic equipment
- Household control circuits
- USB circuits
