LM25088MH-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Base Part Number | LM25088 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 3.2mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Max Input Voltage | 42V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4.5mA |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Max Junction Temperature (Tj) | 150°C |
| Clock Sync | Yes |
| Duty Cycle | 97 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25088MH-1/NOPB Overview
As a result of 16-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). Voltages 4.5V~42V are the dc control's supply voltage and operating voltage, respectively. Worked in an dc switcher with a -40°C~125°C TJ rating. With this switching controller, you can switch at 50kHz~1MHz. A generalization of dc dc regulator can be made using Surface Mount. Enable, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 16 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 24V. In addition to "LM25088", there are other relevant dc to dc converter ics you can find. 16 pins are present on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 1.2V voltage according to the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 10A. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator has a maximum frequency of 1MHz. In a dormant state, the dc switching uses 3.2mA. The maximum input voltage of the dc switcher is 42V, so users need to limit the voltage accordingly. Voltage 24V must be supplied. Voltage 4.5V must be supplied. There should be 4.5mA more than 4.5mA amps of current supplied to the controller.
LM25088MH-1/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM25088MH-1/NOPB Applications
There are a lot of Texas Instruments LM25088MH-1/NOPB DC to DC converter applications.
- Terrestrial set-top boxes
- Bending machines
- Solar power plants
- Arc suppression circuits
- Smart grid
- SMT equipment
- Grinders
- USB circuits
- Printing equipment
- seismic instrument power circuits
