LM25088MH-2/NOPB

16 Terminals 4.5V~42V 16-Pin LM25088 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 50kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-LM25088MH-2/NOPB
Package: 16-PowerTSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 739
Description: 16 Terminals 4.5V~42V 16-Pin LM25088 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 50kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-PowerTSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	24V
Base Part Number	LM25088
Function	Step-Down
Number of Outputs	1
Output Voltage	1.2V
Output Type	Transistor Driver
Operating Supply Voltage	42V
Input Voltage-Nom	24V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	10A
Voltage - Supply (Vcc/Vdd)	4.5V~42V
Quiescent Current	3.2mA
Control Features	Enable, Frequency Control, Ramp, Soft Start
Topology	Buck
Min Input Voltage	4.5V
Control Mode	CURRENT-MODE
Frequency - Switching	50kHz~1MHz
Max Input Voltage	42V
Control Technique	PULSE WIDTH MODULATION
Supply Current-Max (Isup)	4.5mA
Synchronous Rectifier	No
Max Frequency	1MHz
Clock Sync	Yes
Duty Cycle	97 %
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM25088MH-2/NOPB Overview

This switching controller fits most application requirements since it is packaged in a 16-PowerTSSOP (0.173, 4.40mm Width) package. For 1 outputs, the dc motor controller is appropriate. Packaging for the pmic consists of Tube solid enclosures. It is capable of handling Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~42V volts and has 4.5V~42V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 50kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 16. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input is 24V. Other relevant dc to dc converter ics will be returned if you search "LM25088". Total pins of switching converter are 16. Switching converter type is specifically Switching Regulator or Controllers. A 1.2V voltage of DC regulator was detected in the test statistics. normally, the dc dc regulator's output current is 10A, which you should keep in mind when starting a project. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. This dc regulatorhas a max frequency of 1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 42V. As long as the dc switching is in a dormant state, it utilizes 3.2mA. The maximum input voltage of dc switcher is 42V, so users should limit their voltage accordingly. Voltage 24V must be supplied. A voltage of 4.5V must be present in the supply. In order to ensure proper operation, the controller should not receive more current than 4.5mA.