LM25088MHX-2/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Base Part Number | LM25088 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~42V |
| Quiescent Current | 3.2mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4.5mA |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Duty Cycle | 97 % |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25088MHX-2/NOPB Overview
It comes in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With this function, you can deal with Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 4.5V~42V. Suitable for working in an dc switcher that has a -40°C~125°C TJ. This switching controller can switch at 50kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 16 terminations of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 24V. Search for "LM25088" to find other relevant dc to dc converter ics. There are only 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator should be 4.5V. A 40V voltage of DC regulator was detected in the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. DC switcher's Surface Mount qualifies it for most applications and prototypes. The max frequency of the pmic can reach 1MHz. To run the voltage regulator dc to dc safely and reliably, users should apply 42V to the voltage regulator dc to dc. During dormancy, the dc switching uses 3.2mA. There is a requirement for a 24V supply voltage. In order to ensure proper operation, the controller should not receive more current than 4.5mA.
LM25088MHX-2/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM25088MHX-2/NOPB Applications
There are a lot of Texas Instruments LM25088MHX-2/NOPB DC to DC converter applications.
- Product burn-in
- Digital precision reference circuits
- Electrical power transmission
- Machining centers
- Boring machines
- Cutting machine tools
- Network technology
- Textile machinery
- Direct power supply system
- Arc suppression circuits
