LM25088QMH-1/NOPB

16 Terminals 4.5V~42V 16-Pin LM25088 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 50kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-LM25088QMH-1/NOPB
Package: 16-PowerTSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 532
Description: 16 Terminals 4.5V~42V 16-Pin LM25088 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 50kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Number of Outputs	1
Output Voltage	40V
Output Type	Transistor Driver
Operating Supply Voltage	42V
Input Voltage-Nom	24V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	2A
Voltage - Supply (Vcc/Vdd)	4.5V~42V
Quiescent Current	3.2mA
Control Features	Enable, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	4.5V
Topology	Buck
Control Mode	CURRENT-MODE
Frequency - Switching	50kHz~1MHz
Control Technique	PULSE WIDTH MODULATION
Supply Current-Max (Isup)	4.5mA
Synchronous Rectifier	No
Max Frequency	1MHz
Max Duty Cycle	97 %
Clock Sync	Yes
Duty Cycle	97 %
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-PowerTSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
Series	Automotive, AEC-Q100
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	24V
Base Part Number	LM25088
Function	Step-Down

LM25088QMH-1/NOPB Overview

It comes in a 16-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4.5V~42V. Suitable for a -40°C~125°C TJ dc switcher. This switching controller can switch at 50kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control, Ramp, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 24V. A search for "LM25088" will reveal other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. Statistically, the DC regulator outputs 40V voltage. normally, the dc dc regulator's output current is 2A, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 97 % to ensure reliability during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. There is a maximum frequency of 1MHz on this dc regulators. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 42V. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. During dormancy, the dc switching uses 3.2mA. The supply voltage should be 24V. There should be 4.5mA current exceeding 4.5mA supplied to the controller.