LM25088QMH-2/NOPB

16 Terminals 4.5V~42V 16-Pin LM25088 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 50kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-LM25088QMH-2/NOPB
Package: 16-PowerTSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 230
Description: 16 Terminals 4.5V~42V 16-Pin LM25088 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 50kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-PowerTSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TJ
Packaging	Tube
Series	Automotive, AEC-Q100
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	24V
Base Part Number	LM25088
Function	Step-Down
Number of Outputs	1
Output Voltage	40V
Output Type	Transistor Driver
Operating Supply Voltage	42V
Input Voltage-Nom	24V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	10A
Voltage - Supply (Vcc/Vdd)	4.5V~42V
Quiescent Current	3.2mA
Control Features	Enable, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	4.5V
Topology	Buck
Control Mode	CURRENT-MODE
Frequency - Switching	50kHz~1MHz
Control Technique	PULSE WIDTH MODULATION
Supply Current-Max (Isup)	4.5mA
Synchronous Rectifier	No
Max Frequency	1MHz
Max Duty Cycle	97 %
Clock Sync	Yes
Duty Cycle	97 %
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM25088QMH-2/NOPB Overview

Capsuled in the 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. With this function, you can deal with Transistor Driver dc switching's outputs (s). 4.5V~42V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 50kHz~1MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 16. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 24V volts. Search for "LM25088" to find other relevant dc to dc converter ics. There are only 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. This dc dc voltage regulator should be powered by a voltage of 4.5V. The test statistics indicate that DC regulator outputs a voltage of 40V. In most cases, the output current of the dc dc regulator will be 10A, so note that when you start the project. Voltage regulator dc to dc is designed to operate at 97 % duty cycle during power-ups and power-downs to ensure reliability. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. 1MHz is the maximum frequency of this dc regulators. Users should apply 42V to operate the voltage regulator dc to dc safely and reliably. The dc to dc voltage regulator belongs to the Automotive, AEC-Q100 series. DC switching uses 3.2mA when it is dormant. The supply voltage must be 24V. A controller's current should not exceed 4.5mA.