LM25088QMHX-1/NOPB

16 Terminals 4.5V~42V 16-Pin LM25088 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 50kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-LM25088QMHX-1/NOPB
Package: 16-PowerTSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 368
Description: 16 Terminals 4.5V~42V 16-Pin LM25088 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 50kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-PowerTSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	24V
Base Part Number	LM25088
Function	Step-Down
Number of Outputs	1
Output Voltage	40V
Output Type	Transistor Driver
Operating Supply Voltage	42V
Input Voltage-Nom	24V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	10A
Voltage - Supply (Vcc/Vdd)	4.5V~42V
Quiescent Current	3.2mA
Control Features	Enable, Frequency Control, Ramp, Soft Start
Input Voltage (Min)	4.5V
Topology	Buck
Control Mode	CURRENT-MODE
Frequency - Switching	50kHz~1MHz
Control Technique	PULSE WIDTH MODULATION
Supply Current-Max (Isup)	4.5mA
Synchronous Rectifier	No
Max Frequency	1MHz
Clock Sync	Yes
Duty Cycle	97 %
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LM25088QMHX-1/NOPB Overview

Capsuled in the 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. A 4.5V~42V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. Using this switching controller, it is possible to switch at 50kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Enable, Frequency Control, Ramp, Soft Start which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. The 16 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input of 24V. You can find other relevant dc to dc converter ics by searching "LM25088". Total pins of switching converter are 16. Particularly, switching converter is a type of Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4.5V. DC regulator outputs 40V voltage based on test statistics. You should note down the dc dc regulator's usual output current of 10A when you start a project. The Surface Mount makes DC switcher suitable for most applications and prototypes. 1MHz is the maximum frequency of this dc regulators. Users should apply 42V to operate the voltage regulator dc to dc safely and reliably. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. Dormant dc switchings use 3.2mA. Voltage 24V must be supplied. It is important that the controller is supplied with 4.5mA more than 4.5mA volts of current.