LM25101ASD-1/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | LM25101 |
| Number of Outputs | 2 |
| Output Voltage | 120mV |
| Max Output Current | 3A |
| Operating Supply Voltage | 14V |
| Nominal Supply Current | 250μA |
| Output Current | 3A |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 8 ns |
| Turn-Off Delay Time | 4 ns |
| Rise / Fall Time (Typ) | 430ns 260ns |
| Channel Type | Independent |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 100V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25101ASD-1/NOPB Overview
In order to increase flexibility, the package 8-WDFN Exposed Pad is used.Gate drivers is package in Tape & Reel (TR) case.Surface Mount is mounted in the way.Using a 9V~14V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Non-Inverting is the input type used in this program.The configuration is based on 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LM25101.Devices are mounted by Surface Mount.In the device, there are 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.Mosfet driver is possible to achieve a maximum output current of 3A.There are several useful electronic components found in its subcategory of MOSFET Drivers.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 100V.The basis of this model has 2 outputs integrated.The output current supported by the device is 3A.The supply current should be kept at 3mA to ensure higher stability.In this case, it outputs 120mV voltage.Mosfet gate drivers is recommended that you set the operating supply voltage to 14V.
LM25101ASD-1/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 100V
LM25101ASD-1/NOPB Applications
There are a lot of Texas Instruments LM25101ASD-1/NOPB gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- AC-DC Inverters
- Active filtering
- Motor Controls
- Isolated switch mode power supplies (SMPS)
- Motor controllers
- Dual-Battery Systems
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High frequency line drivers
