LM25101ASD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LM25101 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 120mV |
| Nominal Supply Current | 250μA |
| Output Current | 3A |
| Input Type | Non-Inverting |
| Rise Time | 8ns |
| Fall Time (Typ) | 8 ns |
| Rise / Fall Time (Typ) | 430ns 260ns |
| Channel Type | Independent |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 100V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25101ASD/NOPB Overview
A higher degree of flexibility is achieved by adopting its 10-WDFN Exposed Pad package.There is a package in the form of Tape & Reel (TR).Ideally, it should be mounted in the direction of Surface Mount.In the absence of a power supply voltage of 9V~14V V, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a N-Channel MOSFET gate.Temperature range -40°C~125°C TJ is allowed for this device.Mosfet driver uses Non-Inverting as Mosfet drivers input type.The configuration starts with 10 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number LM25101.In this case, Surface Mount indicates how the device is mounted.During design, it is configured with 10 pins.In order to operate, a voltage of 12V has to be applied.There are various useful electronic components in its subcategory MOSFET Drivers.The high-side voltage - Max (Bootstrap) can be up to 100V.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.Mosfet gate drivers can deliver a current of 3A.In this case, it outputs 120mV voltage.
LM25101ASD/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 100V
LM25101ASD/NOPB Applications
There are a lot of Texas Instruments LM25101ASD/NOPB gate drivers applications.
- 3-Phase Motor Inverter Driver
- Digitally controlled power supplies
- Dual-Battery Systems
- serial peripheral interface (SPI), I2C
- Solar inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- High power buffers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Motor Controls
- Motor controllers
