LM25101ASDX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.8mm |
| Base Part Number | LM25101 |
| Number of Outputs | 1 |
| Output Voltage | 120mV |
| Max Output Current | 3A |
| Operating Supply Voltage | 14V |
| Nominal Supply Current | 250μA |
| Output Current | 3A |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 8 ns |
| Turn-Off Delay Time | 4 ns |
| Rise / Fall Time (Typ) | 430ns 260ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 3A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 3A 3A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 100V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25101ASDX/NOPB Overview
There is greater flexibility with the 10-WDFN Exposed Pad package.Tape & Reel (TR) is the packaging method.Configuration is supported by 2 drivers.There is a mounting bracket in the way of Surface Mount.A supply voltage of 9V~14V demonstrates its superiority.This device is designed with a N-Channel MOSFET gate type.This device allows temperatures in the range of -40°C~125°C TJ.The input type for this program is Non-Inverting.The configuration is based on 10 terminations.There are various parts that can be found under its base part number LM25101.Surface Mount is the way it takes to mount the device.Mosfet driver is configured wMosfet driverh 10 pins when designing.In addition, it is specifically designed to operate with a supply voltage of 12V.There is a maximum output current of 3A that can be achieved.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Max (Bootstrap) can be as high as 100V.In terms of its basis, there are 1 outputs integrated.This device is capable of delivering 3A current.The supply current should be kept at 3mA to ensure higher stability.In this case, it produces a voltage of 120mV.Setting the operating supply voltage to 14V is recommended.
LM25101ASDX/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
10 pins
High-side voltage - Max (Bootstrap) of 100V
LM25101ASDX/NOPB Applications
There are a lot of Texas Instruments LM25101ASDX/NOPB gate drivers applications.
- Solar power supplies
- Industrial Modules
- Portable computers
- Industrial Power Supplies
- Isolated Supplies for controller area network (CAN),
- Video amplifiers
- White Goods - Air Conditioner, Washing Machine,
- Motor Controls
- serial peripheral interface (SPI), I2C
- PCMCIA applications
