LM25101CMYE/NOPB
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25101 |
| Number of Outputs | 2 |
| Output Voltage | 280mV |
| Max Output Current | 1A |
| Nominal Supply Current | 250μA |
| Output Current | 3A |
| Max Supply Current | 3mA |
| Propagation Delay | 26 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 8 ns |
| Turn-Off Delay Time | 4 ns |
| Rise / Fall Time (Typ) | 990ns 715ns |
| Channel Type | Independent |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 100V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
LM25101CMYE/NOPB Overview
Its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package provides greater flexibility.A packaging method of Tape & Reel (TR) is indicated.It's mounted on the way to Surface Mount.By using 9V~14V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Input type of Non-Inverting is used.Its configuration is based on a total of 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number LM25101.Mounting the device requires Surface Mount.When designing, the device is configured with 8 pins.In order to operate, a voltage of 12V has to be applied.Mosfet driver is possible for the output current to be as low as 1A.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A high-side voltage can be set up to 100V (Bootstrap).There are 2 outputs integrated for its basis.Mosfet gate drivers can deliver a current of 3A.To increase stability, keep the supply current at 3mA.In this case, the voltage output is 280mV.
LM25101CMYE/NOPB Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 100V
LM25101CMYE/NOPB Applications
There are a lot of Texas Instruments LM25101CMYE/NOPB gate drivers applications.
- Industrial Power Supplies
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- UPS systems
- serial peripheral interface (SPI), I2C
- DC/DC converters
- 3-Phase Motor Inverter Driver
- Power factor correction (PFC) circuits
- Isolated switch mode power supplies (SMPS)
- Portable Navigation Devices
