LM25101CMY/NOPB
| Parameters | |
|---|---|
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 9V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25101 |
| Number of Outputs | 1 |
| Output Voltage | 280mV |
| Max Output Current | 1A |
| Operating Supply Voltage | 14V |
| Nominal Supply Current | 250μA |
| Output Current | 3A |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ns |
| Rise Time | 8ns |
| Fall Time (Typ) | 8 ns |
| Turn-Off Delay Time | 4 ns |
| Rise / Fall Time (Typ) | 990ns 715ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.056 µs |
| Output Peak Current Limit-Nom | 1A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1A 1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 2.3V - |
| Turn Off Time | 0.056 µs |
| High Side Voltage - Max (Bootstrap) | 100V |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
LM25101CMY/NOPB Overview
A higher degree of flexibility is achieved by adopting its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.A packaging method of Tape & Reel (TR) is indicated.The configuration is supported by 2 drivers.In this case, gate drivers is mounted along the way of Surface Mount.WGate driversh a 9V~14V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.There is a gate type of N-Channel MOSFET in this design.Temperature range -40°C~125°C TJ is allowed for this device.This program uses the input type of Non-Inverting.There are 8 terminations to form the base of its configuration.There are various related parts under its base part number LM25101.The device is mounted using Surface Mount.At the time of design, it is configured with 8 pins.The device is specifically designed to operate at 12V volts.There is an output current limit of 1A for this device.There are several useful electronic components found in its subcategory of MOSFET Drivers.Max (Bootstrap) can be as high as 100V.The basis of this system consists of 1 outputs.The device is capable of delivering a current of 3A.As a precaution, make sure the supply current is kept at 3mA.The voltage it outputs is 280mV.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 14V.
LM25101CMY/NOPB Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 100V
LM25101CMY/NOPB Applications
There are a lot of Texas Instruments LM25101CMY/NOPB gate drivers applications.
- Broadcast equipment
- Telecom switch mode power supplies
- RGB applications
- Industrial Power Supplies
- Solar power supplies
- Isolated switch mode power supplies (SMPS)
- Power factor correction (PFC) circuits
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- DC-DC Converters
- Refrigerator
