LM25115MTX/NOPB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Secondary-Side Controller |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 4.5V~30V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25115 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Voltage | 13.5V |
| Operating Supply Voltage | 42V |
| Input Voltage-Nom | 12V |
| Power Supplies | 4.5/7V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 4mA |
| Voltage - Input | 0V~42V |
| Output Current | 20A |
| Output Power | 300W |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency | 1MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25115MTX/NOPB Overview
A package of Tape & Reel (TR) contains it. The 16-TSSOP (0.173, 4.40mm Width) package is available to save space. Surface Mount tells us how to mount it. During function, the temperature should not exceed -40°C~125°C. With its exceptional performance, it is an excellent choice for Secondary-Side Controller. High efficiency can be achieved with a 4.5V~30V supply voltage. There is an analog IC SWITCHING CONTROLLER in this device. In total, there has been 16 terminations of this process. 260 is the peak of the reflow temperature. The pin count is 16. Similar components can be discovered with its base part number of LM25115. This is a part of Power Management Circuits that has been included. The chip is designed to use 16 pins. Power comes from a supply current of 4mA. According to Surface Mount, it is mounted. It gets its energy from a 4.5/7V source. This circuit requires an input voltage of 0V~42V. A nominal input voltage of 12V is chosen to meet the operating requirements. 13.5V is the constant output voltage. In this device, there are 1 outputs. It is set to 20A as the output current.
LM25115MTX/NOPB Features
16-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Power Management Circuits subcategory
Input voltage of 12V
LM25115MTX/NOPB Applications
There are a lot of Texas Instruments LM25115MTX/NOPB Power Supply Control ICs applications.
- Microphone
- Portable data logger
- Data center
- Power factor correction
- Microprocessor system
- Laptop system bus
- Desktop PC
- Network equipment
- Remote control
- Large conference system engineering
