LM25116MH/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | LM25116 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 36V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 6V~42V |
| Quiescent Current | 4.6mA |
| Control Features | Enable, Frequency Control, Ramp, Soft Start |
| Max Output Voltage | 36V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Max Input Voltage | 42V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.215V |
| Switcher Configuration | PUSH-PULL |
| Threshold Voltage | 4.7V |
| Max Frequency | 590kHz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM25116MH/NOPB Overview
The switching controller fits in the 20-PowerTSSOP (0.173, 4.40mm Width) package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. Tube is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. 6V~42V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 50kHz~1MHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. Enable, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 20 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 24V. Search for "LM25116" to find other relevant dc to dc converter ics. There are 20 pins on switching converter. DC regulator outputs 36V voltage based on test statistics. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. 590kHz is the maximum frequency of this dc regulators. During dormancy, the dc switching uses 4.6mA. The maximum input voltage of the dc switcher is 42V, so users need to limit the voltage accordingly. At its maximum, the switching converter can output 36V volts. voltage controllers with a minimum voltage output of 1.215V cannot operate.
LM25116MH/NOPB Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
LM25116MH/NOPB Applications
There are a lot of Texas Instruments LM25116MH/NOPB DC to DC converter applications.
- Hydraulic presses
- Remotely powered electric motors
- Experimental setup
- Digital precision reference circuits
- Various CNC machine tools
- Industrial controllers
- Communication system
- Combined machine tools
- Motor controller circuits
- Precision electronic equipment
